#guitarmod Instagram Photos & Videos

guitarmod - 5.3k posts

Advertisements

Advertisements

    Put in that potmeter i was talking about and recorded some 4am jams:

The first is only the bottom coil on the hotrail coming through the built in speaker 
And the second one is both coils active clean through BIAS FX2
Via a scarlet soundcard

Realized in hindsight that i should have tuned the guitar and turned up the volume but its 4am ffs im tired... #musicvillage
#miniguitar
#hotrail 
#guitarmod
#guitarmods
#jam
#freestyle

    Put in that potmeter i was talking about and recorded some 4am jams:

    The first is only the bottom coil on the hotrail coming through the built in speaker
    And the second one is both coils active clean through BIAS FX2
    Via a scarlet soundcard

    Realized in hindsight that i should have tuned the guitar and turned up the volume but its 4am ffs im tired... #musicvillage
    #miniguitar
    #hotrail
    #guitarmod
    #guitarmods
    #jam
    #freestyle

    3 0 21 July, 2019

Advertisements

Advertisements

    installing strap locks onto my acoustic, because anything that can go wrong will go wrong! excuse my awful fumbling with the washers 😂 I love my fender acoustic, it’s a perfect size (parlour/concert) for me, as a fateful day for my HSC showcase I realised my tanglewood was not going to do the job.
.
.
.
.

#guitarmod #straplock #fender #fenderacoustic #guitarist #handslikehouses

    installing strap locks onto my acoustic, because anything that can go wrong will go wrong! excuse my awful fumbling with the washers 😂 I love my fender acoustic, it’s a perfect size (parlour/concert) for me, as a fateful day for my HSC showcase I realised my tanglewood was not going to do the job.
    .
    .
    .
    .

    #guitarmod #straplock #fender #fenderacoustic #guitarist #handslikehouses

    16 0 18 July, 2019

Advertisements

    start/finish

    start/finish

    73 1 17 July, 2019
    Make any telecaster a “Nashville” telecaster by adding a middle pickup and a 5-way selector switch. Bigsby optional ;)

    Make any telecaster a “Nashville” telecaster by adding a middle pickup and a 5-way selector switch. Bigsby optional ;)

    68 5 17 July, 2019
    Working on my guitarproject. I wanted to get rid of the gear4mlogo so I sanded, torched and clearcoated the headstock. Trying to get the new nut situated properly. Winging it. #guitarmod

    Working on my guitarproject. I wanted to get rid of the gear4mlogo so I sanded, torched and clearcoated the headstock. Trying to get the new nut situated properly. Winging it. #guitarmod

    8 0 15 July, 2019
    @warnermusic blocked the video as albatross was playing in the background.... boooooo. took them 8 minutes though. 
#silentpictures

    @warnermusic blocked the video as albatross was playing in the background.... boooooo. took them 8 minutes though.
    #silentpictures

    42 4 12 July, 2019
    Hey guys! Sorry I've been a little inactive and haven't written much for songs lately... With the tour and everything I've been busy and kind of in a slump for creativity, but I've got some good concepts for some hefty songs coming up soon, so don't miss them! So to start back up, I have my old first guitar, the strat I named "Fireglaze" here... Should I mod it up to be better or just get rid of it? Tell me below and/or vote on my story!! Rock on👌
•
•
•
#strat #guitar #guitars #guitarists #guitarist #strings #music #musician #musicians #song #songs #artist #guitarmod #guitarmods

    Hey guys! Sorry I've been a little inactive and haven't written much for songs lately... With the tour and everything I've been busy and kind of in a slump for creativity, but I've got some good concepts for some hefty songs coming up soon, so don't miss them! So to start back up, I have my old first guitar, the strat I named "Fireglaze" here... Should I mod it up to be better or just get rid of it? Tell me below and/or vote on my story!! Rock on👌



    #strat #guitar #guitars #guitarists #guitarist #strings #music #musician #musicians #song #songs #artist #guitarmod #guitarmods

    43 7 12 July, 2019
    #cocobolo final sanding for oil finish.

    #cocobolo final sanding for oil finish.

    121 11 11 July, 2019

Top #guitarmod posts

Advertisements

Advertisements

    I legitimately nearly forgot to post today, but as promised here's my Warlock after some very minor mods. You can see a before and after in the later photos, but what I did was firstly switch the switch so I could finally have all black hardware, and whilst I was there swap the flimsy aged pots out (I had to go with minipots sadly as there was no room for full sizers...). Finally the ugliest part of my guitar was ammended. That fucking hole. The reason it was there is because I ditched the tone knob and moved the controls down a spot as I don't like the controls being that close to the strings or bridge. People have said put a kill switch in, but with two volumes I kind of already have that, and it's not a feature I use anyway, so I just measured the hole, and closed it with a simple plasic plug. So there we are. Next on the list is new frets. I want 'em stainless and I want 'em jumbo, and only then I'll be content with this thing (unless I decide to refinish it metallic black rather than just a flat black...) What do you lot think? 
#death #metal #deathmetal #guitaramp #guitar #jackson #soloist #guitargear #gear #ibanez #esp #RG #guitarist #art #heavymetal #blackmetal #doommetal #bcr #bcrichwarlock #guitarmod #cannibalcorpse #pointy #brutal #underground #bcrich #warlock #amps #tone #guitarsofinstagram

    I legitimately nearly forgot to post today, but as promised here's my Warlock after some very minor mods. You can see a before and after in the later photos, but what I did was firstly switch the switch so I could finally have all black hardware, and whilst I was there swap the flimsy aged pots out (I had to go with minipots sadly as there was no room for full sizers...). Finally the ugliest part of my guitar was ammended. That fucking hole. The reason it was there is because I ditched the tone knob and moved the controls down a spot as I don't like the controls being that close to the strings or bridge. People have said put a kill switch in, but with two volumes I kind of already have that, and it's not a feature I use anyway, so I just measured the hole, and closed it with a simple plasic plug. So there we are. Next on the list is new frets. I want 'em stainless and I want 'em jumbo, and only then I'll be content with this thing (unless I decide to refinish it metallic black rather than just a flat black...) What do you lot think?
    #death #metal #deathmetal #guitaramp #guitar #jackson #soloist #guitargear #gear #ibanez #esp #RG #guitarist #art #heavymetal #blackmetal #doommetal #bcr #bcrichwarlock #guitarmod #cannibalcorpse #pointy #brutal #underground #bcrich #warlock #amps #tone #guitarsofinstagram

    3,924 32 7 July, 2019

Advertisements

    Everything fits, the body carve is feeling real good, and now its time to  carve the neck. This has been an absolutely fascinating build thus far, can't wait to see it finished and on stage! 😊

    Everything fits, the body carve is feeling real good, and now its time to carve the neck. This has been an absolutely fascinating build thus far, can't wait to see it finished and on stage! 😊

    624 16 16 June, 2019