#gamecosplay Instagram Photos & Videos

gamecosplay - 199.3k posts

    So. Cloud’s belt! I based this off of Smash Bros reference images because that’s the version my son wanted to cosplay and the FF7 design is slightly different, from what I could tell. I’ve never actually played Final Fantasy (pls dnt h8). First, I wrapped Drake with plastic wrap and duct tape.
Then, I drew on the basic shape I wanted and carefully cut it off and lay it flat for my pattern. 
I refined the shape until I liked it, then cut it out on scrap foam to see if it worked. 
To figure out the details, I took a ruler and piece of paper and worked out proportions until I though it looked good. 
After that, I cut out my refined pattern on the foam I wanted to use (I just bought it at @hobbylobby) and checked if it worked. Sometimes I forget to take the thickness of the foam into account and it completely changes the fit. 😭
Then I took my paper design and put it over the foam, tracing over it with a sharp object to transfer it. Since Cloud’s belt design is simple, straight lines, I just cut through the paper with my exacto knife. 
I took off the paper and cleaned the design as needed. I deepened the cuts a bit and made sure they connected. 
I took a dremel to all the edges to clean it up, then heat sealed the foam to form it and open the design. I use my hair dryer and it works pretty well for me. 
I cut belt loops and the thinner, grey belt. I just used long rectangles of foam and cut off the excess. 
Then I glued the loops on, attached velcro, and made sure the whole thing worked how I wanted it to. 
Finally, I covered everything in mod podge since I wanted to keep the color of the foam. 
I might add some details with paint if I have time, but for now I’m okay with how it looks. 
This is my first wearable foam build and I’m really happy with how it turned out! I learned a lot and wanted to share my progress/process because I love watching other cosplayers’ builds. The stuff I do is pretty basic, but I hope it’s entertaining anyway. ✌🏻

    So. Cloud’s belt! I based this off of Smash Bros reference images because that’s the version my son wanted to cosplay and the FF7 design is slightly different, from what I could tell. I’ve never actually played Final Fantasy (pls dnt h8). First, I wrapped Drake with plastic wrap and duct tape.
    Then, I drew on the basic shape I wanted and carefully cut it off and lay it flat for my pattern.
    I refined the shape until I liked it, then cut it out on scrap foam to see if it worked.
    To figure out the details, I took a ruler and piece of paper and worked out proportions until I though it looked good.
    After that, I cut out my refined pattern on the foam I wanted to use (I just bought it at @hobbylobby ) and checked if it worked. Sometimes I forget to take the thickness of the foam into account and it completely changes the fit. 😭
    Then I took my paper design and put it over the foam, tracing over it with a sharp object to transfer it. Since Cloud’s belt design is simple, straight lines, I just cut through the paper with my exacto knife.
    I took off the paper and cleaned the design as needed. I deepened the cuts a bit and made sure they connected.
    I took a dremel to all the edges to clean it up, then heat sealed the foam to form it and open the design. I use my hair dryer and it works pretty well for me.
    I cut belt loops and the thinner, grey belt. I just used long rectangles of foam and cut off the excess.
    Then I glued the loops on, attached velcro, and made sure the whole thing worked how I wanted it to.
    Finally, I covered everything in mod podge since I wanted to keep the color of the foam.
    I might add some details with paint if I have time, but for now I’m okay with how it looks.
    This is my first wearable foam build and I’m really happy with how it turned out! I learned a lot and wanted to share my progress/process because I love watching other cosplayers’ builds. The stuff I do is pretty basic, but I hope it’s entertaining anyway. ✌🏻

    14 3 10 minutes ago
    you lookin for work? how do you feel about bounties? they’re legal... mostly. 💰💰💰 (📸 @fnkinetic)

    you lookin for work? how do you feel about bounties? they’re legal... mostly. 💰💰💰 (📸 @fnkinetic )

    52 6 34 minutes ago

    13 2 1 hour ago
    Red hair power!
Cosplayer: .elsie
______________________________________________ Пожалуйста поддержите и нас! Сохраняйте наши фото к себе в профиль! Не забывайте про лайки и комментарии. Please support us! Keep our photos to your profile! Don't forget the likes and comments. Por favor apoyanos tambien! ?Guarda nuestras fotos a tu perfil! No olvides los gustos y comentarios. Por favor, ajudem-nos tambem! Mantenha nossas fotos no seu perfil! Nao esqueca os gostos e comentarios. ______________________________________________ 🤍 💑 💞
__________________________

    Red hair power!
    Cosplayer: .elsie
    ______________________________________________ Пожалуйста поддержите и нас! Сохраняйте наши фото к себе в профиль! Не забывайте про лайки и комментарии. Please support us! Keep our photos to your profile! Don't forget the likes and comments. Por favor apoyanos tambien! ?Guarda nuestras fotos a tu perfil! No olvides los gustos y comentarios. Por favor, ajudem-nos tambem! Mantenha nossas fotos no seu perfil! Nao esqueca os gostos e comentarios. ______________________________________________ 🤍 💑 💞
    __________________________

    24 1 1 hour ago

Top #gamecosplay posts

    Here’s some 2Booty for your Thursday morning! 🍑
-
-
📷: @jpadenphoto !
Cosplay: @miccostumes !

    Here’s some 2Booty for your Thursday morning! 🍑
    -
    -
    📷: @jpadenphoto !
    Cosplay: @miccostumes !

    1,632 22 13 June, 2019